16/12/2018

BDM100 programmer (OUTDATED TOOL!)

BDM100 programmer

Short review of BDM100 programmer. OUTDATED TOOL!

BDM100 is BDM-100 ECU Tuning Programmer/ECU/Reader/Flasher.
BDM-100 is a universal reader and programmer that allows the user to read and program files in the ECU supplied with Motorola MPC5xx processors. BDM-100 requires the ECU to be opened and removed so that you can connect a flat cable to a specific area to the ECU. The other end of the BDM100 is connected to the USB port of any computer. BDM100 will allow you to create copies of the ECU software. Chip tuning of ECUs with Motorola MPC555 – 565.

It is good ECU reader/writer, it supports many types of ECUs. But there is one clue: you need to open your ECU, connect BDM’s adapters and then read/write (cable flashers do not need technical skills). It needs technical skills.

BDM100 programmer support Device.pdf

Comments

  1. Hi,

    Just wondering if anyone can help. I’m wondering if it will be possible to use one of the programmers to flash the ECU on my 1999 VW Golf 1.8T AGU. The ECU in it appears to be a Bosch M3.8.2.

    Has anyone any experience with dealing with such ECU’s and could provide any guidance? I have done quite a lot of searching before asking this question but have been unable to find an answer.

    Thanks

    Jimmy

  2. safsaf says:

    Hi,
    I have a HYUNDAI accent 2010, that the KEFICO (K03) is damaged, , so can i bought another one not like the same model for example accent 2005 and reprogram it using BDM 100 to compatible with my car.
    sorry for my bad english

  3. hi,i have a honda crv 2007 2.0 petrol engine can i tune the car by my self? what i need to buy for that? thx

  4. david says:

    Hi I have a japan made toyota vitz rs turbo that I would like to remap. Can you tell me what is the best tool and software for this kind of car. Will be using it for racing. By the way do you already have a remap for this model. Would be nice if you have an article as to how tk go about remaping in a step by step tutorial. Would really like to learn how to remap cheaper than buying a greedy ultimate piggyback ecu for tunning

  5. martin says:

    i have a mk3 mondeo tdci 130 eur4 duratorque
    what cable can i use for flashing the ecu?

  6. Peter says:

    Hello there, nice site here.
    Can you tell me if GALLETTO 1260 will remap a laguna 1.9 DCI 88KW, EDC15C2?
    Best Regards
    Keep going 🙂

  7. Brilliant work! Keep it up, thanks

  8. What can you say about this one? http://www.ebay.co.uk/itm/KWP2000-Plus-CHIP-TUNING-ECU-ENGINE-TUNE-REMAP-FLASHER-FLASHING-TOOL-/221000678526?pt=UK_Diagnostic_Tools_Equipment&hash=item3374aabc7e is it good for my MK4 TDI 1,9 66kW? Or should i look for something else? What would you recommend for AUDI, VW, SKODA, SEAT chip tuning?

    Thanks in advance.

  9. Faiz Hashmi says:

    Hey Admin,

    Could you please tell me which hardware i should use to reprogram Nissan Altima 2.5 ECU (Middle East Specs)? The Ecu model is 23710-ZX16E. My car is limited to 140 Km/hr and doesn’t exceed that speed. I did a bit of research and found out that Reprogramming will solve the problem. Tried nissan consult iii plus chinese clone, but reprogramming menu is not accessible. Hope you could advice me better.

    Regards,

  10. Pieter says:

    hi,
    Can you tell me with tool i have to buy to remap a citroën c2 vts 1.6 16v Petrol.
    Because nobody can conform wat i need because i have the petrol version.
    Many thanks

    • Hello. I do not recommend to tune this car. It is low capacity petrol engine, which will not give you any useful benefit.

      • Pieter says:

        He has already 130pk on the dynamobank stock .
        but if I would have let it chipt bij company he would have 150pk.
        But what tool do you advise me if i want to do this myself?

  11. Shane says:

    Hi, this is a great website. Just wondering could you help me.
    I need a tool to read Renault Laguna 130 dCi ECU. I think its a Bosch EDC16.
    Also a Volvo S40 1.9 with EDC15.
    Will this tool work for these? If not would you be able to recommend another tool?
    Thanks

  12. subhi says:
  13. subhi says:

    i will learn type of ecu and write here.ok?can you give me email for pm?

  14. subhi says:

    hi.i am new in this section.i want to learn this.is it compatible with mercedes benz w202 c230 kompressor?please answer me.thanks (sorry for my english)

  15. ginger says:

    Why it is cheaper then digiprog ? it looks more serious

Speak Your Mind

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close